LOAD CELL


Trade Information

  • Supply Ability 10 Piece Per Week
  • Delivery Time 1 Week
  • Main Export Market(s) Asia, Eastern Europe, Western Europe, Middle East, Africa
  • Main Domestic Market All India

Product details

1. Allowable Side Load 50%
2. Deflection < 0.5 mm at FSO
3. Environmental Protection Class IP 68
4. Finish & Construction Electro less Nickel Plated Tool Steel
5. Insulation Resistance (50V) >1000 Mega Ohms
6. Nominal Output 2.0 m V/V
7. Temp. Compensated Range 0-60 Degree C
8. Ultimate Overload 300% of Rated Capacity
9. Insulation Resistance >1000 Mega Ohms
10. Excitation Voltage 10 VDC -15 VDC
11. Output Resistance 700 +- 2 Ohms

Price And Quantity

  • Minimum Order Quantity 1 Piece
  • Price ON REQUEST INR/Piece
  • Product Specifications

  • Compensated Temperature 10-50
  • Output Voltage 2mv
  • Application WEIGHING SCALE, TENSILE TESTING, MACHINE AUTOMATION, ON LINE TENSION MEASUREMENTS
  • Classification ELECTRONIC
  • Accuracy 0.025%
  • Product Type LOAD CELL
  • Storage Temperature 0-60
  • Output Analog Sensor
  • Operating Temperature 0-50
  • Operating Voltage 5-10
  • Type STRAIN GAGE BASED DOUBLE ENDED SHEAR BEAM LOAD CELL
  • Usage WEIGHING MACHINES

Ball Cup Type Double ended Shear beam Load Cell

1. Model 70610
2. Capacity 0-10Tf to 0-40Tf
3. Load Direction Compression only
4. Type Double Ended Shear Beam Load Cell , Truck Scale Load Cell , Weigh Bridge Load Cell
5. Industries Weighing
6. Application Truck Weighing
7. Description 70610 is double ended shear beam load cell. It is constructed from high grade tool steel for resistance to heavy shock loads associated with truck weighing. It is electrolysis Nickel plated for corrosion resistance.
8. Features This cell is designed to load from center through ball cup mechanism which helps for self restoring and self centering for improvement in accuracy. It is offered with full mounting assembly for easy installation. It is fitted with gass discharge tubes for transit voltage protection caused due to lightning or line voltage faults.

WEIGHBRIDGE DIGITIZER/INDICATOR


FEATURES, FACILITIES & SPECIFICATION OF WEIGHT DIGITIZER

1.FEATURES
  • Menu driven operation.
  • Remote sensing excitation circuitry.
  • High resolution analog to digital converter.
  • Programmable update rate with adjustable digital averaging and Auto Latching
  • Automatic calibration check.
  • Auto zero maintenance.
  • IBM Keyboard /keypad interface.
  • Real time clock.
  • Watch dog timer.
  • Password security.
  • Two full duplex configurable RS 232C/RS422/RS485 serial communication ports.
  • Centronics parallel interface.
  • Self & operator diagnostics.
  • High efficiency seven segment displays for weight.
  • 16 x 2 Liquid Crystal Display for message and 7 Segment Led for Weight Display.
2.FACILITIES
1. Digital Indicator model: RASH 2010 will be highly sophisticated state of the art technology based weighing terminal with embedded micro controller and dual displays (separate display LED for Weight and 64 x 2 characters dot matrix LCD display for Truck data entry & operator interface b) Digital Weight indicator will be a model approved legal metrology weight & measures and the systems will meet international standards of OIML and BIS
2. Printer Interface RASH 2010 Digitizer will be provided with standard centronics compatible printer port in addition to RS232c serial interface port.
3. Auto Zero Tracking The Weighbridge should have automatic zero tracking feature in which the zero scale increase due to accumulation of dust, slurry and mud etc on the platform will be automatically made zero up to a limit of 3 resolutions.
4. Auto calibration The system will be provided with latest auto calibration method through software digital calibration to enable a periodic checking of the system accuracy at regular intervals. The Zero and span of the system will be automatically corrected by this method.
5. Real time clock The Real time clock will be an in built feature of the system with date and time will always be displayed on the LCD data display and the same is also printed out in the tare, gross and summary reports.
6. Front end circuitry Highly sophisticated , fast acting and very large internal counts based analog Digital conversion , very low off set , high gain , high impedance and directly controlled by the micro controller will be the salient feature of the front end system.
7. Watch dog Timer The system will be provided with a watch dog timer circuit for automatic initialization in case of deviation from normal functioning due to any spurious external interface.

The micro processor based circuitry will provide the fastest, most accurate and flexible performance that existing technology can offer. Highly sophisticated analog to digital conversion, RFI/EMI signal protection and digital filtering will provide high level of signal integrity in harsh industrial environments 16 x 2 Liquid Crystal Display with backlit facility will provide direct operator interface and display messages include prompting instructions, operating status , error messages , alarm information raw scale data etc. The high efficiency red/green seven segment LED display for Weight information will be unmistakable in poor visual conditions. The RASH 2010 also will be capable of printing operating messages scale information through centronics parallel port. Remote data transmission will be in built in the system. A system watch dog timer will provide automatic re-installation in case of anything goes crazy. Above all an easy calibration technique will be adopted in the system.

3.SPECIFICATION
1. Load Cell Excitation 6-350 Ohm Load cells at 12 DC / 15 V DC 12-700 Ohm Load cells at 12 V DC/ 15 V DC
2. Printer Interface RASH 2010 Digitizer will be provided with standard centronics compatible printer port in addition to RS232c serial interface port.
3. Load current will be capable of driving 12-700 Ohm.6-350 Ohm Load cells.
4. Auto calibration The system will be provided with latest auto calibration method through software digital calibration to enable a periodic checking of the system accuracy at regular intervals. The Zero and span of the system will be automatically corrected by this method.
5. Interconnection cable requirement 6 wire with remote sensing facility.
6. Analog signal sensitivity 0.3 micro Volts/internal count.
7. Input overload 15 V continuous
8. Conversion rate 2000/Sec
9. Resolution Selectable 1,2,5,10,20,50,100
10. Over capacity annunciation will be provided both in weight display and message display.
11. Lead zero suppression Standard
12. Display 16 x 2 characters dot matrix . LCD display with backlit annunciation and Led for Weight Display operator interface
13. Calibration Full Digital Calibration
14. Decimal Point Selectable.
15. AZM capture range Selectable to Off, 0,5,1,2,3 graduations.
16. Motion Band Selectable 1,3,5 or 10 display division
17. Serial Output Two full duplex RS 232 /4- 20 mA
18. Printer port Centronics Parallel port
19. Digital Input 4 Nos. Optically isolated active high inputs
20. Digital Output 4 Nos. Potential free outputs with contact rating of 24 VDC/1AMP
21. Power Line voltage 230 V AC 15% Line frequency 50 Hz. Power consumption 30 VA.
22. Operating temperature 0 to 50 degree C
23. Weight 5 Kgs
24. Enclosures 300 x 190 x 150 mm

SOFTWARE


ADVANTAGES:

  • Check vehicle photo after weighment. System Provide Photo Viewer Facility.
  • Remove manual operator mistake.
  • Fast throughput for busy weighbridges
  • Fully integrate solution into you Back Office Systems like SAP, Oracle, ERP.
  • Automatic identification of driver, truck, trailer with RFID TAG
  • The same radio card is used by the Driver at the tare weighbridge as at gross.
  • Monitor Real-time Weighing by Operator in Office
  • Monitor Real-time Activity By HO Office

Techsys India’ offering customized software solutions to our customers. We are offering Windows Based Weighbridge Software, It will Provide Secure Weighment with Various Facility Like CCTV Image Capture Facility, RFID Integration, Barrier Gate Integration, etc… We Customize Weighbridge Software as per customer Requirement so its suite his require. Weighbridge software is a weighing and computing system with extensive data extraction, collection and processing functions.

SOFTWARE FEATURES:

  • CCTV Camera Integration with Software, As per client require Up To 4 Camera.
  • We Use To Integrate Any Make / Any Brand Like HikVision, Dahua, CP Plus, Panasonic, Sony, Avtech, Zicom, Honeywell, LG Electronics, Godrej, BOSCH SECURITY
  • Image Capture Automatically At That time on Weight Save so Vehicle Position and Live Weight Can Auto Capture
  • Auto email : PDF File with Vehicle Image, Also Store in HDD.
  • Robust and weather-proof stainless steel cabinet for added protection with optional climate control.
  • E-monitoring system for remote site
  • Prohibit theft possibility by driver
  • Verify Extra Goods and Load on Weighbridge
  • Vehicle Loaded Material Verify by Operator Without go out.
TECHNICAL SPECIFICATIONS:
  • Load Cell connectivity : 4 (JB04), 6 (JB06) or 8 (JB08)
  • Electrical Protection : Gas discharge tubes, SVP diodes and varistors for protection against transients induced
  • by line voltage spikes, surges and lightning
  • Environmental Protection: Rubber Seal Gasket on top cover and air tight cable glands for entry of load cell cables
  • and indicator cables
  • Dimensions : 230 mm (W) X 190 mm (D) X 55 mm (H)
  • Weight : 2.0 kg

Junction Box (Digital Type) (RASH 2010 JB040) TECHSYS INDIA

Load cell junction box has been designed for the use of summing the signal outputs from multiple load cells The body of the junction box is constructed using thick MS sheet and is powder coated to withstand harsh environmental conditions. Load cell junction box is provided with a rubber seal on the top cover. All incoming and outgoing cables are routed through airtight cable glands. This arrangement prevents moisture and dust ingress in the box. This protects the internal circuit from dust and moisture deposits which further helps in preventing signal distortion. A high quality signal offers higher resolution or division size in the constructed weighing scale.

FEATURES:
  • Makes weigh scale installation fast and easy
  • Powder coated MS sheet enclosure sealed against moisture and dust
  • Compression cable glands for load cell cables and output cable to indicator
  • Section slot plug connector every section
  • Protection against high voltage induced by spikes, surges and lighting
APPLICATION:
  • Weighbridge
  • Multi load cell scales

MOUNTING ACCESSORIES



Techsys India’ offering wide range in mounting accessories. We are manufacturing best quality products in mounting accessories for load cells. we offer a range of load cell mounts for use in different applications. Their purpose is to optimize the performance of our load cells. They ensure proper alignment and prevent unwanted forces from impacting readings.

BOOM BARRIER AUTOMATION



Techsys India’ offering wide range in mounting accessories. We are manufacturing best quality products in mounting accessories for load cells. we offer a range of load cell mounts for use in different applications. Their purpose is to optimize the performance of our load cells. They ensure proper alignment and prevent unwanted forces from impacting readings.

Shear beam load cell


Price And Quantity:
  • Price on request INR/Piece
  • Minimum Order Quantity 1 Piece
Product Specifications:
  • Compensated Temperature 10-50
  • Product Type LOAD CELL
  • Operating Voltage 5-10
  • Storage Temperature 0-60
  • Classification ELECTRONIC
  • Output Voltage 2mv
  • Output Analog Sensor
  • Application WEIGHING SCALE, TENSILE TESTING, MACHINE AUTOMATION, ON LINE TENSION MEASUREMENTS
  • Usage WEIGHING MACHINES
  • Type LOAD CELL
  • Accuracy 0.025
  • Operating Temperature 0-50
Product Description:
1. Deflection < 0.5 mm at FSO
2. Environmental Protection Class IP 68
3. Material Stainless Steel
4. Material of Construction Electroless Nickel Plated Tool Steel
5. Nominal Output 3.0 m V/ V
6. Temp. Compensated Range 0-60 C
7. Temperature Effect on Output < 0.0015% FSO
8. Insulation Resistance >1000 Mega Ohms
9. Excitation Voltage 10 VDC -15 VDC
10. Output Resistance 700 +- 2 Ohms
11. Input Resistance 770 +- 20.0 Ohms
12. Deflection < 0.5 mm at FSO
Trade Information:
  • Supply Ability 10 Piece Per Week
  • Delivery Time 1 Week
  • Main Export Market(s) Asia, Eastern Europe, Middle East, Africa
  • Main Domestic Market All India